Name: 2 Zombie Dogs from Bite the Bullet's Bullet Hell:Hero set. Total height apx.28mm
Brand: Dungeon & Dragons
Price: 6.3 USD
Availability: InStock

Handmade Miniatures

Funny dog with shield from Irnkman Minis

Physical printed resin miniature with base
Base apx 28mm across
Body apx. 33mm from foot to eye
Total height apx. 46mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Irnkman Minis

Funny Dog with shield from Irnkman Minis. Total height apx. 46mm

Walrus dog from Clay Cyanide's Inuit religion collection

Physical printed resin miniature with base.
Base apx 60mm across, figure apx. 27mm. Total height apx. 35mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print it out in color. 
99% of the time your figure will be grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Clay Cyanide.
Digital files may be purchased directly from them on MyMiniFactory

Walrus Dog from Clay Cyanide's Inuit series. apx. 35mm

Worshipers of the ancient Shapeshifter God Melmor, the Kobolds are ignoble lizard-dog horned demons who move around hopping on two legs. These short wicked monsters infest mines by stealing precious minerals and replacing it with toxic ones in order to spread the plague of their god. Cities with sewage systems are teeming with these evil and keen beings. Adventurers should never underestimate Kobolds: their innate abilities to brew potent poisons, stab and hide could catch even the most veteran soldiers off guard.

Set Artisan Guild Plague Mine Kobolds

Yojimbo with pet dog Daigoro from Ethan Savage Studio
 
Unpainted Physical printed resin miniature with base.
Base apx 50mm across on the round
Yojimbo Body apx. 50mm from foot to eye
Daigoro Body apx. 14mm from foot to eye
Total height apx. 58mm.
This particular model consists of 3 separate pieces (base, body, dog) and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted - super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.

I do my best, but some light sanding or other cleanup may be needed prior to painting.
Please note the listing image is the artist's render. I can't actually print it out in color.

Minis are printed on demand, please allow a little time to make and clean them.

I am officially licensed to sell physical prints of models designed by Ethan Savage.

Yojimbo w/ Daigoro from Ethan Savage Studio. Total height apx. 58mm

Guard Dog from Irnkman Minis

Physical printed resin miniature with base
Base apx 40mm across
Body apx. 14mm from foot to eye
Total height apx. 41mm
This particular model consists of 2 separate pieces (base, body) and will need assembly

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Irnkman Minis

Guard Dog from Irnkman Minis. Total height apx. 41mm

Pair of Zombie Dogs from Bite the Bullet's Bullet Hell: Heroes set

Physical printed resin miniature with base
Bases apx 32mm across
Dog 1 apx. 12mm from foot to eye
Dog 2 apx. 21mm foot to eye
Total heights apx. 26mm & 30mm
This particular model set consists of 4 separate pieces (2x base, 2x body) and will need assembly

Printed in Syratech Navy Grey
They will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put them together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Bite the Bullet

2 Zombie Dogs from Bite the Bullet's Bullet Hell:Hero set. Total height apx.28mm

Brain Hound V2 from SRS Studio's Astral Horrors set

Physical printed resin miniature with base.
Base apx 25mm across
Body apx. 18mm Tall
Total height apx. 23mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.
Note: model just barely fits on base

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in solid color. 
99% of the time your figure will be navy grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

#358-Astral Horrors

Brain Hound V2 from SRS Studio's Astral Horrors set. Total height apx. 23mm

Hades on his throne with Cerberus beside him from Clay Cyanide's Greek Mythos collection.
32mm Scale body, physical printed resin miniature with base.
This particular model consists of 3 separate pieces (base, body, dog)
 and will need assembly.

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports. 
I do my best, but some light sanding or cleanup may be required.

99% of the time your figure will be grey, unless I run out and have to use a different resin.
Please note the listing image is the artist's render. I can't actually print it out in color. 

Minis are printed on demand, please allow a little time to make and clean them.

I have been officially licensed to sell physical prints of models designed by Clay Cyanide.
Digital files may be purchased directly from them on the My Mini Factory website.

Hades w/ Cerberus resin print from Clay Cyanide's Greek Myth collection. 32mm

Brain Hound V4 from SRS Studio's Astral Horrors set

Physical printed resin miniature with base.
Base apx 25mm across
Body apx. 22mm Tall
Total height apx. 29mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.
Note: model just barely fits on base

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in solid color. 
99% of the time your figure will be navy grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

#358-Astral Horrors

Brain Hound V4 from SRS Studio's Astral Horrors set. Total height apx. 29mm

Artificer with pet from Bite the Bullet's Warforged set

Physical printed resin miniature with base
Base apx 25mm across
Body apx. 38mm from foot to eye
Total height apx. 55mm
This particular model consists of 3 separate pieces (base, body, dog) and will need assembly
Variant: Wearing a hat
Note: Dog doesn't fit on base

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in solid color
99% of the time your figure will be navy grey, unless I run out and must use a different resin

Minis printed on demand, please allow a little time to make and clean them

I am officially licensed to sell physical prints of models designed by Bite the Bullet

Artificer with pet from Bite the Bullet's Warforged set. Total height apx. 55mm

Brain Hound V1 from SRS Studio's Astral Horrors set

Physical printed resin miniature with base.
Base apx 25mm across
Body apx. 15mm Tall
Total height apx. 20mm
This particular model consists of 2 separate pieces (body, base) and will need assembly.
Note: model just barely fits on base

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together.
Figures and bases will be cleaned, cured and stripped of supports.
I do my best, but some light sanding or cleanup may be required.

Please note the listing image is the artist's render. I can't actually print in solid color. 
99% of the time your figure will be navy grey, unless I run out and have to use a different resin.

Minis are printed on demand, please allow a little time to make and clean them.

#358-Astral Horrors

Brain Hound V1 from SRS Studio's Astral Horrors set. Total height apx. 20mm

Hyan, blink hound from DM Stash's Masters of the Arcane set

32mm Scale Physical printed resin miniature with base
Base apx 30mm across on the round
Body apx. 16mm from foot to eye
Total height apx. 30mm
This particular model consists of 2 separate pieces (base, body) and will need assembly
Variant: Full dog, no portal. Same size and price

Printed in Syratech Navy Grey
It will ship Unassembled & Unpainted -  super glue or a like adhesive will be needed to put it together
Figures and bases will be cleaned, cured and stripped of supports
I do my best, but some light sanding or other cleanup prior to painting may be required

Please note the listing image is the artist's render. I can't actually print in color
99% of the time your figure will be grey, unless I run out and have to use a different resin

Minis printed on demand, please allow a little time to make and clean them

I have been officially licensed to sell physical prints of models designed by DM Stash

Dungeon & Dragons Handmade Dog Miniatures

Dungeon & Dragons Handmade Dog Miniatures

Save this search

Get the app.

SHOP

SELL

SUPPORT

COMPANY & POLICIES